Roll-A-Door® Series 2

Curtain Qualities

Continuous brake pressed steel curtain
Manufactured from 0.5mm gauge, flexible steel curtain, pressed to a horizontal ribbed profile, sliding between vertical guides
Deep rigid channel grooves
Aluminium bottom rail with weatherseal

Prevents penetration of moisture and dust, thereby minimising the chance of corrosion
Strong, while providing an attractive appearance
Added protection against dirt, leaves and weather

Nylofelt^® is used to minimise friction at the working surface.
Continuous smooth, quiet operation is an ongoing benefit of this product, without so much as a touch of lubricant.

Waist high slide bolt locking is located internally and supplied on the left hand side as standard
Waist high internal slide bolt located on right hand side or both sides
No bending required to unlock doors
Ensured security
Optional centre lift lock with external key and internal knob operation, or internal and/or external bottom rail slide bolt locking

B&D Series 2 Light Industrial Roll-A-Doors are available in an extensive range of standard Colorbond^® colours including special Zincalume^® coated finishes.
Zincalume^® coated finish can be polyurethaned on site for even wider colour selection.

No greasing of the door guides is required, and the axle, hubs and all other working components have either been manufactured with self-lubricating materials or greased at the factory.
To reduce operational and replacement costs, curtains are easily repaired.

Where a choice of partial or total access to the building is required, a combination of mullions and multiple Roll-A-Door® Series 2 – Light Industrial rolling doors is recommended, rather than one wide door. Motorisation is not recommended with mullions. Features include:
- Mullions can be simply disengaged to provide unrestricted full width access
- Mullions for smaller doors lift out by hand
- Individual low effort operation
- Privacy and weather protection of a small opening

Wicket gates provide quick and easy access in or out of the premises, without the need to raise the door. Features include:
- Opening size is 1780mm high x 600mm wide. This gate is specified when inward opening is required
- Fitted with external key operated night latch lock
- When the door is in the open position the cranked bottom rail hangs 65mm below the lintel

Where ventilation is required the doors may be perforated to allow light penetration or up to 10% airflow. This offeres you all the security you may need plus airflow.